• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Get Back in Your Car If You Locked Car Keys in Car

The chances are good that you will lock your keys to your car in the car at some moment. There are a variety of ways to get keys back into your vehicle without causing damage to anything.

One method is to make use of a coat hanger, or another long, thin object to hook the key fob. This method is great for older vehicles that have the traditional door lock.

Use a Pump Wedge

If you lock your keys in your car for the first time, it can be an overwhelming experience. If you're prepared, it could be a lot easier than you imagined to get my keys out of my car your keys back into your car without causing damage to the lock. Here are a few tips to try prior to calling a roadside assistance lockout service car.

You can make use of a simple tool, such as an air pump wedge to open your car's door. It's an air bag made of plastic that is pumped to create a gap between the door and the weather stripping. The opening is large and wide enough to insert car-unlocking tool. It also allows you to reach the manual locking mechanisms found in most cars.

You could also use a wire coat hanger to hang your coat, but it might require a little more effort. To make this work you'll require pliers to form an upright side and a hook end. The hook will fit into the control arm of lock rod inside the front door and the straight side will rest against the handle. Then you can lower the door and the lock the key in the car will come off.

This method is ideal for cars that have post locks that are positioned on the window sill. It isn't a good fit for the kind of locks that are affixed to the sides of the vehicle, but it is a good option as a last resort in cases where other methods don't work.

Another alternative is to utilize a Slim Jim, which is a thin strip of metal that is used to unlock cars. Slim Jims are readily available at the majority of hardware stores. You may need to seek out assistance in finding them. Place the Slim Jim into the gap between the door and the weather stripping, and then use its hook-like end to secure the inside of the lock mechanism.

If all else fails, it may be necessary to call a professional assistance with your vehicle locked. The good news is that most locksmith services have a mobile service, so they'll be able to come to you at your location. These services can often be cheaper than a roadside assistance service and will also have the tools needed to resolve your problem.

Use a wire hanger

It can be difficult to open the car lock without the proper tools. The good part is that a few household items may help you get your keys back. You can use a wire hanger that you straightened out and then attach a hook to the end. This hook is used to control the lock and can be easily moved between positions to break open the lock. You can also use a paper clip or thin rod to open the door of your car. Make sure the item you select is rigid enough to hold its shape under pressure.

If you don't have a coat hanger made of wire lying around, any long piece of twine or wire can be used. The key is to find a length that can reach to the top of the door, past the weather strip. You can then make an edging and then insert the end into the area where the handle of the door is affixed to the vehicle, or in the event that you know the car's locking mechanism, you can place the hook inside the area in which the bar that opens the lock is.

While this MacGyver-inspired method might not be applicable to all vehicles, it's worth a try. It may be necessary to move the stick in and out of the locking mechanism, however, this is much better than trying to forcefully pull it open, which could result in damage to the ignition.

If you've tried the other methods and are still locked out of your vehicle It's important to remember that a professional will usually unlock your car quickly and securely. A lot of roadside assistance providers provide this service at a minimal fee or at no cost for members. Another option is to call your local police department. They will usually unlock cars or provide a window replacement service depending on their resources and if the situation is life-threatening. Some police departments have special equipment, like a slim Jim that is able to disable the lock pin.

Use a Slim Jim

The Slim Jim is an unlocking car door service tool that locksmiths use to unlock their doors. It is basically wedges that allow quick access to the internal rod that activates the mechanism of the car lock. This tool is made of rubber not wood, as the latter can cause splinters or even fragments to be left inside the door. It is recommended to avoid using the Slim Jim without professional help.

Using Slim Jim Slim Jim can seem like a complex process, but it is actually quite simple. First, you must locate something in your home that is both long and thin. A metal ruler works well however, you can also use wire hangers. The next step is to straighten the piece of metal until it has a hook on one end. This can be accomplished by cutting a small groove on the end of a stick using the aid of a knife. Then, you can remove the hook from the stick's end and then mold it in a way that it can fit around the rod that locks.

Insert the metal rod into the space between the window and the door frame. When you move it along the rod, pay close attention to any resistance. If you feel resistance, you've reached the internal locking device or latch in the vehicle door frame.

After a few minutes you'll notice that the lock begins to move. Once the lock moves you can pull it up and use your key to unlock the door. Be careful not to put your finger on the rods of the door lock when you pull up. Untrained users may be able to remove the rods from the lock and cylinder. If you're unable to open your car door think about calling an expert locksmith for assistance, as they are trained to do this without causing any damage to the vehicle. They can also help find your keys that are missing, if they are locked inside the vehicle.

Use adhesive tape

The most common item that gets lost is a car key. For those who have them, they can trigger panic as they frantically search their pockets and bags for them. For others, it may result in a costly visit to the auto shop to get a key replaced. The loss of a car key can be an enormous inconvenience. However there are a variety of low-cost and fast methods to get your keys back.

Adhesive tape is a well-known method. This is a quick and easy way to remove your car keys without locksmiths or breaking your window. However, it is essential to use a solvent that is intended for use in automobiles. This will ensure that the solvent is safe to apply to the bodywork of your car. After applying the solvent to the adhesive tape, allow it to sit for the amount of time suggested by the product. Use gloves to lift up the adhesive tape. The car key will show underneath.

Another way to unlock your car is to utilize a tool to help decipher the code that your vehicle uses to communicate with the key fob. These tools can be found at most hardware stores. A typical tool will be able to detect the signal transmitted by your key fob, and then decode it to determine what to do when locked out of car it is. It will also keep a few bits of information, like the errors correction bits at end of the signal transmission.

Many vehicles are now fitted with keyless entry systems that allow you to open and start your car without needing to insert the ignition key. These systems communicate using radio frequency with your key fob and keyless entry module. This technology has significantly reduced car theft rates. But, this doesn't mean that you shouldn't be cautious when it comes to stopping car theft.

If you lose your car keys, it's always advisable to keep spare keys available. This is because the latest keys are more secure and are difficult to replace. This is because they have transponder elements that make it impossible to copy keys.